|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Z-Power LED X10490 Technical Data Sheet F50360 F50360 Features * Super high Flux output and high Luminance * Designed for high current operation * Low thermal resistance * SMT solderability * Lead Free product * RoHS compliant Z-Power series is designed for high current operation and high flux output applications. Z-Power LED's thermal management perform exceeds other power LED solutions. It incorporates state of the art SMD design and Thermal emission material. Full color Z-Power LED is using 3 RGB power chips and isolated thermal slug. In case of the full color product used in architectural lighting or decoration, it emits 7colors in one package so that it can render a clear mixed color when it is mixed with other colors. Applications * Mobile phone flash * Automotive interior / exterior lighting * Automotive signal lighting * Automotive forward lighting * Architectural lighting * LCD TV / Monitor Backlight * Projector light source * Traffic signals * Task lighting * Decorative / Pathway lighting * Household appliances * Remote / Solar powered lighting Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Full Code of Z-Power LED Series Full code form : X1 X2 X3 X4 X5 X6 - X7 X8 - X9 X10 X11 X12 X13 1. Part Number - X1 : Color - X2 : Z-Power LED series number - X3 : LENS type - X4 : Chip quantity (or Power Dissipation) - X5 : Package outline size - X6 : Type of PCB 2. Internal Number - X7 - X8 3. Code Labeling - X9 : Luminous flux (or Radiant flux for royal blue) - X10 X11 X12 : Dominant wavelength (or x,y coordinates rank code) - X13 : Forward voltage 4. Sticker Diagram on Reel & Aluminum Vinyl Bag PART NO. : X1 X2 X3 X4 X5 X6 - X7 X8 QUANTITY : ### LOT NUMBER : ########## BIN CODE : X9 X10 X11 X12 X13 For more information about binning and labeling, refer to the Application Note -1 Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Outline Dimensions 1. Emitter Type BLUE (-) BLUE (+) Cathode GREEN (-) GREEN (+) Green RED (-) RED (+) Red Cathode Mark NC Notes : 1. Tolerance is 0.2mm 2. Scale : none 3. NC PAD isn't connected to anode or cathode *The appearance and specifications of the product may be changed for improvement without notice. Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 1. Electro-Optical characteristics at (Red, Green, and Blue All Color in use) 1-1 Electro-Optical characteristics at TA=25C Parameter Luminous Flux [1] Symbol V [2] Value Min Typ 105 (78) [3] R: 2.6 G: 3.8 B:3.6 R,G,B:350 120 R: 25, G: 25, B: 22 @ White Balance [3] Max R:3 G:4.2 B:4.1 Unit lm Forward Voltage [4] VF IF 2 1/2 - V Forward Current View Angle [5] mA deg. C /W Thermal Resistance [6] RJ-C 1-2 Absolute Maximum Ratings Parameter Symbol Value Red 400 Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity [7] Green 400 Blue 400 Unit IF Pd Tj Topr Tstg - 700 (@1KHz, 1/10duty) 1.2 125 1.68 145 -30 ~ +85 -40 ~ +100 10,000V HBM 1.64 145 mA W C C C - *Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere under 350 mA red, green and blue. [3] Reference white balance current condition (IF=R:220, G:350, B:100 mA) RGB total power consumption is about 2W. Driving 350mA respectively, the RGB total power consumption is about 3.2W. [4] A tolerance of 0.1V on forward voltage measurements [5] Viewing angle is the reference condition. [6] RJ-C is measured with only emitter .(25 C Tj 110 C) [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink --------------------------Caution-------------------------- Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 2. Blue 2-1 Electro-Optical characteristics at IF=350mA, TA=25C Value Parameter Symbol Min Luminous Flux [1] [3] Unit Typ 13 460 3.6 120 14 Max 465 4.1 lm nm V deg. C /W V [2] 455 - Dominant Wavelength Forward Voltage View Angle [5] [4] D VF 2 1/2 Thermal Resistance [6] RJ-C 2-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity [7] Symbol IF Pd Tj Topr Tstg - Value 400 700 (@1KHz, 1/10duty) 1.64 145 -30 ~ +85 -40 ~ +100 10,000V HBM Unit mA W C C C - *Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 1.0nm for dominant wavelength [4] A tolerance of 0.1V on forward voltage measurements [5] Viewing angle is the reference condition. [6] RJ-C is measured with only emitter .(25 C TJ 110 C) [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink --------------------------Caution-------------------------- Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 3. Green 3-1 Electro-Optical characteristics at IF=350mA, TA=25C Value Parameter Symbol Min Luminous Flux [1] [3] Unit Typ 57 525 3.8 120 16 Max 535 4.2 lm nm V deg. C /W V [2] 520 - Dominant Wavelength Forward Voltage View Angle [5] [4] D VF 2 1/2 Thermal Resistance [6] RJ-C 3-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity [7] Symbol IF Pd Tj Topr Tstg - Value 400 700 (@1KHz, 1/10duty) 1.68 145 -30 ~ +85 -40 ~ +100 10,000V HBM Unit mA W C C C - *Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 1.0nm for dominant wavelength [4] A tolerance of 0.1V on forward voltage measurements [5] Viewing angle is the reference condition. [6] RJ-C is measured with only emitter .(25 C TJ 110 C) [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink --------------------------Caution-------------------------- Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Characteristics for Z-Power LED 4. Red 4-1 Electro-Optical characteristics at IF=350mA, TA=25C Value Parameter Symbol Min Luminous Flux [1] [3] Unit Typ 35 625 2.5 120 16 Max 630 3 lm nm V deg. C /W V [2] 618 - Dominant Wavelength Forward Voltage View Angle [5] [4] D VF 2 1/2 Thermal Resistance [6] RJ-C 4-2 Absolute Maximum Ratings Parameter Forward Current Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity [6] Symbol IF Pd Tj Topr Tstg - Value 400 700 (@1KHz, 1/10duty) 1.2 125 -30 ~ +85 -40 ~ +100 10,000V HBM Unit mA W C C C - *Notes : [1] SSC maintains a tolerance of 10% on flux and power measurements. [2] V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 1.0nm for dominant wavelength [4] A tolerance of 0.1V on forward voltage measurements [5] Viewing angle is the reference condition. [6] RJ-C is measured with only emitter .(25 C TJ 110 C) [7] It is included the zener chip to protect the product from ESD. 1. Please do not drive at rated current more than 5 sec. without proper heat sink --------------------------Caution-------------------------- Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Relative Spectral Power Distribution Relative Spectral Power Distribution Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Color spectrum, TA=25C 1. Pure White (IF = R:220, G:350, B:100 mA for the reference condition) 1.0 Standard eye response curve 0.8 0.6 0.4 0.2 0.0 300 400 500 600 700 800 900 Wavelength (nm) 2. Blue, Green, Red (IF= 350mA) 1.0 Red Green Blue 0.8 0.6 0.4 0.2 0.0 300 400 500 600 700 800 W a v e le n g th (n m ) Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Relative Light Output [ % ] Dominant Wavelength Shift [V] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Junction Temperature Characteristics 1. Junction Temperature vs. Relative Light output at350mA 120 100 80 60 40 RED GREEN BLUE 20 0 25 50 75 100 o 125 150 Junction Temperature [ C] 2. Junction Temperature vs. Dominant Wavelength Shift at350mA 6 5 RED GREEN BLUE 4 3 2 1 0 25 50 75 100 o 125 150 Junction Temperature [ C] Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Forward Voltage Shift [V] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Junction Temperature Characteristics 3. Junction Temperature vs. Forward Voltage Shift at 350mA 0.0 -0.1 -0.2 -0.3 RED GREEN BLUE -0.4 -0.5 25 50 75 100 o 125 150 Junction Temperature [ C] Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Average Forward Current [mA] Relative Luminous Flux Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Forward Current Characteristics 1. Forward Voltage vs. Forward Current, TA=25 400 Red Green Blue 300 200 100 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Forward Voltage [V] 2. Forward Current vs. Normalized Relative Luminous Flux, TA=25 1.5 1.2 Red Green Blue 0.9 0.6 0.3 0.0 0 100 200 300 400 Forward Current [mA] Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Dominant wavelength Shift(nm) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Forward Current Characteristics 3. Forward Current vs Wavelength shift TA=25 10 8 6 4 2 0 -2 -4 0 100 200 300 400 Red Green Blue Forward current(mA) Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Current [mA] Current [mA] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Ambient Temperature vs Allowable Forward Current 1. Blue, Green (TJMAX = 145 400 C) 300 200 o RjaT = 50 C/W 100 RjaT = 40 C/W RjaT = 30 C/W o o 0 0 20 40 60 80 100 120 o 140 160 Ambient Temperature [ C] 2. Red (TJMAX = 125 C) 400 300 200 100 RjaT = 50 C/W RjaT = 40 C/W RjaT = 30 C/W o o o 0 0 20 40 60 80 100 o 120 140 Ambient Temperature [ C] Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Relative Intensity Relative Intensity Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Typical Dome Type Radiation pattern 1. Pure White 1.0 0 30 0.8 0.6 60 0.4 0.2 0.0 -80 -60 -40 -20 0 90 Directional angle (deg.) 2. Red, Green, Blue 1.0 0.8 Red Green Blue 0.6 0.4 0.2 0.0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Directional angle (deg.) Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) 150 ~ Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Soldering profile, TA=25C 1. Reflow Soldering Conditions / Profile 260 240 220 200 Tm : Reflow machine setting temp (max 30 sec.) Ts : Surface temp of PCB (max) Ts : Surface temp of PCB (recommend) Ts : Surface temp of PCB (min) 180 Pre-heating Rising 5 C/sec Cooling -5 C/sec 0 Time [Hr] 2. Hand Soldering conditions Pad : Not more than 3 seconds @MAX280 * Caution 1. Reflow soldering should not be done more than one time. 2. Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, suitable tools have to be used. 3. Pad is to be soldered. 4. When soldering, do not put stress on the LEDs during heating. 5. After soldering, do not warp the circuit board. 6. Recommend to use a convection type reflow machine with 7 ~ 8 zones. Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Recommended Soldering 1. Solder pad Note : 1. All dimensions are in millimeters (tolerance : 0.2 ) 2. Scale none *The appearance and specifications of the product may be changed for improvement without notice. Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Reel Packaging Note : 1. The number of loaded products in the reel is 500 or 1000ea 2. All dimensions are in millimeters. (tolerance : 0.2 ) 3. Scale : none *The appearance and specifications of the product may be changed for improvement without notice. Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Precaution for use * Storage To avoid the moisture penetration, we recommend storing Z Power LEDs in a dry box (or desiccator) with a desiccant . The recommended storage conditions are Temperature 5 to 30 degrees Centigrade. Humidity 50% maximum. * Precaution after opening packaging However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40 Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, components should be dried for 10-12hr at 605 * Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. * Please avoid rapid cooling after soldering. * Components should not be mounted on warped direction of PCB. * Anti radioactive ray design is not considered for the products listed here in. * Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or shredded in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. * This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. * When the LEDs are illuminating, operating current should be decided after considering the package maximum temperature. * LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. * The appearance and specifications of the product may be modified for improvement without notice. * Long time exposure of sunlight or occasional UV exposure will cause lens discoloration. * Attaching LEDs, don't use adhesives to generate organic vapor. Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Handling of Silicone resin LEDs Z-Power LED is encapsulated by silicone resin for the highest flux efficiency. Notes for handling of Silicone resin Z-Power LEDs * Avoid touching silicone resin parts especially by sharp tools such as Tweezers * Avoid leaving fingerprints on silicone resin parts. * Please store the LEDs away from dusty areas or seal the product against dust. * When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented. * Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc) Rev. 01 May 2008 www.ZLED.com Document No. : SSC-QP-7-07-24 (Rev.00) |
Price & Availability of F50360 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |